|Name:||Forged Stainless Steel Globe Valve-Angle Pattern||Media:||Oli,Gas,Water|
|Power:||Manual,Pneumatic,Solenoid,Electrical Actuated||Temperature Of Media:||Medium Temperature,Normal Temperature,High Temperature,-65°F To 450°F (-54℃ To 232℃)|
90 Degree Globe Valve High Pressure Globe Valve Forged Steel Stainless Steel F304L Dn40 Throttle Regulating Disc
Angle pattern globe valve
ANGLE PATTERN GLOBE VALVES DESIGN is a modification of the basic Tee Pattern Globe valve. The ends of this Globe valve are at an angle of 90 degrees, and fluid flow occurs with a single 90 degrees turn. They have a slightly lower coefficient of flow than wye-pattern Globe valves. They are used in applications that have periods of pulsating flow because of their capability to handle the slugging effect of this type of flow.
The Angle pattern globe valve is a modified version of “T”-Pattern Globe valve with inlet and outlet at right angles. When fitted at a change in piping direction, this valve eliminates a bend and has the advantage of smaller pressure drop than a conventional “T” pattern globe valve. Angle valves have the same features of stem, disc and seat ring design as the globe valve. The fundamental difference between the two is that the fluid flow through the angle valve makes a 90° turn. These valves offer less resistance to flow than a globe valve with an elbow which it would replace. An angle valve reduces the number joints in a line, in addition to saving installation time. They are also used in applications that have periods of pulsating flow because of their capability to handle the slugging effect of this type of flow.
Features and benefits