|Design Standard:||API594||Body Material::||Forging Steel Stainless Steel A182 F316|
|End Connection.:||Wafer Type End||Face To Face:||API594|
|Test And Inspection:||API 598|
Single Disc Swing Check Valve PN20,
DN125 Wafer Type Single Disc Swing Check Valve,
125mm double check valve
DN125 Single Disc Swing Check Valve Wafer PN20 125mm Non Return Valve API594 A182 F316 Stainless Steel Check Valve
|Item||Forged Steel Single Disc Check Valve|
|Port Size||5'' DN125|
|Structure type||Wafer Single Disc Type Check Valve|
|Material||Forging Steel Stainless Steel A182 F316|
SINGLE DISC WAFER CHECK VALVES
VERVO Valves has very extended experience in manufacturing of Single Plate Check Valves
Size: 2” up to 60”(DN 15 up to DN 1500)
Pressure Rating: ASME 150#,300#,600#,900#,1500#, 2500#
Materials: Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.
End Connection: Wafer Type, Wafer Lug Type
Design – ASME B16.34 / API594
Face to Face – ASME B16.10
End Flange – ASME B16.5
Test – API598
Special – NACE MR-01-75
VERVO single plate swing type wafer check valve comes with a short pattern sandwich type flangeless wafer body conforming to the API 6D and ASME B 16.10 face to face dimensions. The valve has a simple but reliable and robust construction.
The wafer check valve is ideal for pump discharge duties. The eccentric mounted hinge pin in combination with the disc seat guarantees a positive shut off of the returning media. Wafer Check Valves also available with Spring Loaded version on specific request.
The short face to face dimensions and low weight allows a simple space saving installation between the mating companion flanges. The wafer check valves are suitable for mounting between weld neck or slip on type companion flanges of different standards. The need for flange gaskets during installation is totally eliminated due to the in-built face sealing ‘O’ rings provided on the sealing face.
Very low face to face dimensions hence space required for mounting is less than 10%of that conventional valves.
Very low weight-total weight is only approximately 1/6 the weight of a conventional check valve.
Short wafer body enables mounting the valve with shorter length fasteners of lesser number compared to flanged swing check valve. Approximately 50% saving in cost of fasteners.
Considerable secondary advantages resulting in substantial savings in handling, packing, transportation, installation and maintenance.
Saving in terms of overall length required for piping.
Tightening torque to be applied on the companion flange bolting is lower due to face sealing O-rings.
Practically maintenance free due to fewer number of parts and simple construction.
Self centering in pipeline due to controlled outside diameter, enables easy installation.
Keywords of DN125 Single Disc Swing Check Valve Wafer PN20 125mm Non Return Valve API594 A182 F316 Stainless Steel Check Valve
DN125 API594 Single Plate Swing Check Valve,150LB Single Disc Wafer Check Valve,Forging Steel A182 F316 Wafer Check Valve, Forging Steel Stainless Steel Wafer Check Valve,DN125 A182 F316 Check Valve,API594 Stainless Steel A182 F316 Check Valve,API594 Wafer Type Single Disc Non Return Valve,NRV Check Valve,125MM Single Disc Wafer Check Valve