High Pressure DN400 Flanged Floating Ball Valve Metal Seated

Basic Information
Place of Origin: LISHUI,ZHEJIANG
Brand Name: VERVO
Certification: API/CE/ISO
Model Number: Q41Y-600LB-DN400
Minimum Order Quantity: 10
Price: Negotiable
Packaging Details: plywood case
Delivery Time: 1 month
Payment Terms: L/C, T/T, Western Union, D/A
Supply Ability: 40000pcs/month
Name: 3 Piece Ball Valve DBB Ball Valve Standard: API6D
Pressure: Class150 Class300 Class600 Class900 Class1500 Class2500 Temperature Of Media: Medium Temperature,Normal Temperature,High Temperature-29℃ To 120℃)
Size: 2"-20",DN50-DN500 Seat Material: PTFE,RPTFE,Devlon,Nylon,Peek,Metal To Metal
Connection: Thread BSP NPT,Female Thread/OD Size,threaded,Female,RF,RTJ,SW
High Light:

DN400 Flanged Floating Ball Valve

,

API6D Floating Ball Valve

,

Metal Seated DBB Ball Valve

DN 400 Double Block And Bleed Ball Valve High Pressure Flange metal seated floating ball valve Twin Ball DBB Valve

 

Model number Q41Y-600LB-DN400
Item Twin Ball valve    
Certification CE,TS,ISO9001,ISO14001,ISO18001
Connection form flange                                            
Body material forging
Seal material Double seal construction                  
Feature Easy disassembly and assembly

 

VERVO Twin Ball DBB Valve are offered in 3 PC side entry body, the design adopts the structure of two balls in series.  Twin Ball DDB Valve are manufactured according to API 6D or API 608 Design and fire tested per API 6FA and API 607 Standard.

 

1, Double Block And Bleed(DBB)

When the valve is closed and the middle cavity is emptied through the discharge valve, the upstream and downstream seats will independently block the fluid at the inlet and outlet to realize double block function. Another function of the discharge device is that the valve seat can be checked if there is any leakage during the test. In addition, the deposits inside the body can be washed and discharged through the discharge device to reduce damage to the seat by impurities in the medium.

 

2, Low Operating Torque

The trunnion pipeline ball valve adopts the trunnion ball structure and floating valve seat, so as to achieve lower torque under operating pressure. It uses self-lubricating PTFE and sliding bearing to reduce the friction coefficient to the lowest in conjunction with the high intensity and high fineness stem.

 

3, Emergency Sealing Device

The ball valves with the diameter more than or equal to 6″(DN150) are all designed with sealant injection device on stem and seat. When the seat ring or stem O ring is damaged due to accident, the corresponding sealant can be injected by the sealant injection device to avoid medium leakage on seat ring and stem. If necessary, the auxiliary sealing system can be used for washing and lubricating the seat to maintain its cleanliness.

 

4, Fireproof Structure Design

In case of fire during the use of valve, the seat ring, stem O ring and middle flange O ring made of PTFE, rubber or other non-metal materials will be decomposed or damaged under high temperature. Under pressure of the medium the ball valve will push the seat retainer rapidly towards the ball to make the metal seal ring contact the ball and form the auxiliary metal to metal sealing structure, which can effectively control valve leakage. The fireproof structure design of trunnion pipeline ball valve conforms to requirements in API 607,API 6FA,BS 7655 and other standards.

 

5, Anti-static Structure

The ball valve is provided with the anti-static structure and adopts the static electricity discharge device to directly form a static channel between the ball and body or form a static channel between the ball and body through the stem, so as to discharge the static electricity produced dut to friction during the opening and closing of ball and seat through the pipeline, avoiding fire or explosion that may be caused by static spark and ensuring system safety.

 

6, Reliable seat sealing structure

The seat sealing is realized through two floating seat retainers. They can float axially to block the fluid, including ball sealing and body sealing. The low pressure sealing of valve seat is realized by spring pre-tightening. In addition, the piston effect of valve seat is desinde reasonably, which realizes high pressure sealing by the pressure of the medium itself. The following two kinds of ball sealing can be realized.

 

7, Single Sealing (automatic Pressure Relief In Middle Cavity Of Valve)

Generally, the single sealing structure is used, that is, there is only the upstream sealing. As the independent spring loaded upstream and downstream sealing seats are used, the over-pressure inside valve cavity can overcome the pre-tightening effect of the spring, so as to make the seat release from the ball and realize automatic pressure relief towards the downstream part.The upstream side: When the seat moves axially along the valve, the pressure P exerted on the upstream part(inlet) produces a reverse force on A1. As A2 is higher than A1, A2-A1=B1, the force on B1 will push the seat to the ball and realize tight sealing of the upstream part.

 

8. Double Sealing (double Piston)

The trunnion pipeline ball valve can be designed with the double sealing structure before and after the ball for some special service conditions and user requirements. It has double piston effect. Under normal condition, the valve generally adopts primary sealing. When the primary seat sealing is damaged and causes leakage. The secondary seat can play the function of sealing and enhance the sealing reliability.The seat adopts the combined structure. The primary seal is metal to metal seal. The secondary seal is fluorine rubber O ring that can ensure the ball valve reach the bubble level sealinge . When the pressure differential is very low, the sealing seat will press the ball through the spring action to realize primary sealing. When the pressure differential rises, the sealing force of seat and body will increase accordingly so as to tightly seal the seat and ball and ensure good sealing performance.Primary sealing: Upstream. When the pressure differential is lower or there is no pressure differential, the floating seat will move axially along the valve under the spring action and push the seat towards the ball to keep tight sealing. When the pipeline pressure P increases, the force exerted on the area A2 of valve seat is higher than the force exerted on the area A1, A2-A1=B1. Therefore, the force on B1 will push the seat towards the ball and realize tight sealing of the upstream part.Secondary sealing: Downstream. When the pressure differential is lower or there is no pressure differential, the floating seat will move axially along the valve under the spring action and push the seat towards the ball to keep tight sealing. When the valve cavity pressure P increases, the force exerted on the area A4 of valve seat is higher than the force exerted on the area A3,A4-A3=B1. Therefore, the force on B1 will push the seat towards the ball and realize tight sealing of the upstream part.

 

9. Safety Relief Device

As the ball valve is designed with the advanced primary and secondary sealing that has double piston effect, and the middle cavity cannot realize automatic pressure relief, the safety relief valve must be installed on the body in order to prevent the danger of over-pressure damage inside the valve cavity that may occur due to thermal expansion of medium. The connection of the safety relief valve is generally NPT1/2. Another point to be noted is that the medium of the safety relief valve is directly discharged into the atmosphere. In case direct discharging into the atmosphere is not allowed, we suggest that the ball valve with a special structure of automatic pressure relief towards upper stream should be used. Refer to the following for details. Please indicate it in the order if you don not need the safety relief valve or if you would like to use the ball valve with the special structure of automatic pressure relief towards upper stream.

 

10. Secial Structure Of Automatic Pressure Relief Towards Upper Stream

As the ball valve is designed with the advanced primary and secondary sealing that has double piston effect, and the middle cavity cannot realize automatic pressure relief, the ball valve with the special structure is recommended to meet the requirement of automatic pressure relief and ensure no pollution to the environment. In the structure, the upper stream adopts primary sealing and the lower stream adopts primary and secondary sealing. When the ball valve is closed, the pressure in the valve cavity can realize automatic pressure relief to the upper stream, so as to avoid the danger caused by cavity pressure. When the primary seat is damaged and leaks, the secondary seat can also play the function of sealing. But special attention shall be paid to the flow direction of the ball valve. During the installation, note the upstream and downstream directions. Refer to the following drawings for sealing principle of the valve with the special structure.

 

11. Blow-out Proof Stem

The stem sdopts the blow-out proof structure. The stem is designed with the footstep at its bottom so that with the positioning of upper end cover and screw, the stem will not be blown out by the medium even in case of abnormal pressure in the valve cavity.

 

12. Corrosion Resistance And Sulfide Stress Resistance

Certain corrosion allowance is left for the body wall thickness. The carbon steel stem, fixed shaft, ball, seat and seat ring are subjected to chemical nickel plating according to ASTM B733 and B656. In addition, various corrosion resistant materials are available for users to select.According to customer requirements, the valve materials can be selected according to NACE MR 0175/ISO 15156 or NACE MR 0103, and strict quality control and quality inspection should be carried out during the manufacturing so as to fully meet he requirements in the standards and meet the service conditions in sulfurization environment.

 

13. Extension Stem

As for the embedded valves, the extension stem can be supplied if ground operation is needed. The extension stem is composed of stem, sealant injection valve, and drainage valve that can be extended to the top for the convenience of operation. Users should indicate the extension stem requirements and length when placing orders.For ball valves driven through electric, pneumatic and pneumatic -hydraulic operations , the extension stem length should be from the centre of pipeline to top flange.

 

PRODUCT RANGE

High Pressure DN400 Flanged Floating Ball Valve Metal Seated 0

Sizes NPS 2 to NPS 500

Class 150 to Class 2500

 

MATERIALS

High Pressure DN400 Flanged Floating Ball Valve Metal Seated 1

Available materials: A105, LF2, F304, F316 ,F51,F53,F55, Alloy 20, Monel, Inconel, Hastelloy

 

DESIGN FEATURES

High Pressure DN400 Flanged Floating Ball Valve Metal Seated 2

Full or Reduced Bore

RF, RTJ, or BW

Bolted Bonnet

Renewable seat rings

Metal seat or Soft seat

 

DESIGN STANDARD

High Pressure DN400 Flanged Floating Ball Valve Metal Seated 3

Design & manufacture according to API 6D, ASME B16.34

Face-to-face according to VERVO STD

End Connection according to ASME B16.5 (RF & RTJ), ASME B16.25 (BW)

Test &inspection according to API 598, API 6D

Also available per NACE MR-0175, NACE MR-0103, ISO 15848

High Pressure DN400 Flanged Floating Ball Valve Metal Seated 4

RFQ

High Pressure DN400 Flanged Floating Ball Valve Metal Seated 5

1/Do you have any Certification ?

Yes we have ISO9001-2015 and CE/PED according to Directive 2014/68/EU,fire safe certificate,ISO15848-1,API6D

2/Can we visit your factory?

Sure, we welcome you to visit our factory , check our production lines and know more about our strength and quality.

3/Do you have quality control system?

Yes, we have ISO/PED certifications and our own quality control laboratory.

4/Can you arrange the shipment for us?

Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best price with earliest vessel and professional service.

5/Can I get some samples?

We are glad to provide free samples to you, but the express fee will be on your charge.

6/What is your after-sale service?

We provide after-sale service and offer 100% guarantee on our products.

7/What is your main products?

Valve, and in order to meet different needs, we expanded our business, we also do sanitary type products.

8/Are you trading company or manufacturer

We are factory, and welcome to visit our factory

9/What is your MOQ

No MOQ, As your request .Normal size and material we have stock

 

Keywords of DN 400 Double Block And Bleed Ball Valve High Pressure Flange metal seated floating ball valve Twin Ball DBB Valve

High Pressure DN400 Flanged Floating Ball Valve Metal Seated 5

Twin Ball Valve,DBB Ball Valve,ASTM A105N Floating Ball Valve, Floating Ball Valve, Class 600 Ball Valve, DN400 Ball Valve, RTJ Ball Valve,16 Inch Ball Valve,Soft Seated Ball Valve,Metal to Metal Ball Valve,Metal to Metal Seat,DBB BALL VALVE,Double Block Double Bleed Ball Valve,Twin Ball Valve,DBB valve

Contact Details
admin

WhatsApp : +008613676590849